Label Removal
To remove labels from the printer before a roll has been finished, be sure that the Peel Lever
is in its inactive (up) position.
• Open the Top Door.
• Tear off any labels or backing paper sticking out of the front of the printer.
• Lift up the Label Guide.
• Locate the Print Head Release Lever inside the printer (Refer to the Printer Parts
and Descriptions page) and press down while pulling the label roll back through the
printer.
• Remove the remaining labels from the Spool and store for later use.
• You are now ready to load another roll of labels.
®
14
Avery
Personal Label Printer