Rotating Objects - Avery Dennison Label Printer User Manual

• Select Snap to Grid if you want to "snap" objects to the grid.
Once a grid is created, select Layout > Snap to Grid to enable or disable this function.
Center Vertically and Horizontally
To center an object vertically or horizontally on the label template, click on the object to select
it. Select Layout > Center and choose Horizontal or Vertical. You can also click
on the Advanced toolbar. To place the object in the center of the label, center it both vertically
and horizontally.
Coordinates
To select the precise coordinates of an object, click on the object to select it. Select Format >
Properties and click the Position tab. Type the Horizontal (distance from left edge) and
Vertical (distance from top edge) setting for the top left corner of the object. Click OK.
You can also right-click an object to access the Properties dialog box.

Rotating Objects

To rotate an object, click on the object to select it.
Select Format > Rotate or click
Advanced toolbar. The Rotation dialog box
appears. Choose between four different angles (0,
90, 180 or 270 degrees) by clicking the appropriate
ABC button. To enter a different angle, type the
setting in the Exactly field. Click OK to complete
the rotation.
Bar code objects and graphic objects can be rotated
using the pre-defined angles only (0, 90, 180 or 270
degrees). WMF graphic images cannot be rotated
due to a limitation of the WMF file format.
You can also right-click an object to access the Rotate command.
If you rotate a multiple selection, each object is rotated on its own axis. If you wish to rotate
objects on a common, central axis, group the objects first. When rotating a group, all objects
on the
®
Avery Personal Label Printer
, or
63