03/10 Rev. 5.04-04
Removing the complete
print module
Construction of the print module
The following components are mounted on the
cast plate (1) of the print module (2):
– Feed unit
– Material guide
– Ribbon unwinding unit
– Ribbon take-up
– Ribbon transport
– Other integral components.
The print module can be completely
removed from the printer!
Disassembly of the print module
1. Remove the rear hood.
How to? – See chapter "Rear Hood".
2. Remove the print head (3).
How to? – See chapter "Print Head".
3. Remove the contact spring (4) (Phillips
screwdriver).
Continued on the next page.
SERVICE MANUAL
64-xx – 64-xx Dispenser
Service Mechanics
1
2
3
4
33