Inserting And Creating Bar Codes - Avery Dennison Label Printer User Manual

If Link is selected, the file is inserted into your design as a link. Changes to the linked file
affect the original file and vice versa. If Link is not selected, the object is embedded in your
design. Changes to an embedded file have no affect on the original file and vice versa.
Click OK to insert the object. The object can be moved and resized as desired. To edit the
object again, double-click the object.

Inserting and Creating Bar Codes

The following bar code types are available in DesignPro: EAN 8, EAN 13, EAN 128, Code
128 (Type A, B, C), Code 39, 2/5 Standard, 2/5 Interleaved, Codabar, UPC-A, UPC-E and
Postnet. To change the default settings for the Bar Code tool, refer to the Customizing
DesignPro Settings section in DesignPro Tools.
For detailed information about each type of bar code supported by DesignPro and for
additional information on using this tool, refer to the DesignPro Help file.
If creating identical bar codes on all labels, insert the bar code object on the Master tab. To
insert a bar code, select Insert > Bar Code or click
cursor where you want the bar code to begin. Click and drag to draw a rectangle. Release the
mouse.
To automatically create a pre-defined bar code object, click the Bar Code button and then
click once on the label template. Type the bar code information in the object. Click outside
the object and the bar code appears.
Generating a Bar Code Using a Serial Number
To generate a bar code using a serial number, select the Master tab. Serial numbers can only
be inserted on the Master tab. Insert and create the bar code object. Click in the bar code
object and select Insert > Serial Number or click
settings in the Serial Number dialog box as desired. Click Insert. The serial number field has
been entered in the bar code object. For more information on using serial numbers, refer to
Inserting and Generating Serial Numbers in this section.
Formatting Bar Codes
To format the bar code, click on the bar code object to select it. Select Format > Bar Code
Parameters. The Bar Code dialog box appears.
You can also right-click a bar code object to access Bar Code Parameters.
®
92 Avery Personal Label Printer
on the Vertical toolbar. Place the
on the Vertical toolbar. Enter the