Avery Dennison Label Printer User Manual page 24

• Locate the longer, Right Hand Spool piece.
(See graphic)
• Insert the shaft of the Right Hand Spool piece
into the hole in the center of the label roll and
slide as far as possible.(See graphic) Press the
roll onto the ring at the base of the shaft until
snug.
• Pick up the flat, Left Hand Spool piece, and slide it
onto the shaft, making sure that the roll gripping ring
is facing the roll. (See graphic) Slide this ring into the
hole in the center of the label roll and press until snug.
The labels are now ready to load into the machine!
2.
• Slide the loaded Spool into the rails in the
Top Door with the labels coming over the
top of the Spool. (See graphic) If the Spool
does not easily slide into the door, turn the
Spool over and try again.
The Spool is designed to only work one way. Forcing the Spool into the door in the wrong
direction can cause damage to the parts.
®
10 Avery Personal Label Printer