Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40 Administrator's Manual

Software version tc7.0
Hide thumbs Also See for TelePresence System Codec C40:
Table of Contents

Advertisement

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60

Administrator Guide

Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Software version TC7.0
DECEMBER 2013
Codec C40/C60
Profile 42"
Profile 52"/55"
Profile 52" Dual / 55" Dual
Profile 65"
Administrator guide
For Cisco TelePresence System Codec C40/C60 and Profiles using C40/C60
D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
1

Advertisement

Table of Contents
loading

Summary of Contents for Cisco TelePresence System Codec C40

  • Page 1: Administrator Guide

    Profile 52” Dual / 55” Dual Profile 65” Administrator guide For Cisco TelePresence System Codec C40/C60 and Profiles using C40/C60 D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 2: Table Of Contents

    Video settings ............... 108 Application programming interface......... 42 Experimental settings ............123 Managing the video system’s certificates ......43 D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 3 Technical specifications ............141 Supported RFCs ..............149 User documentation on the Cisco web site ......150 Cisco contacts ..............151 D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 4: December

    Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide Contents Introduction Introduction Web interface System settings Setting passwords Appendices Chapter 1 Introduction D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 5: User Documentation

    ► User documentation on the Cisco web site appendix. • Administering TC Endpoints on CUCM: • Codec C40 Tasks to perform to start using the product with the Cisco Unified Communications Manager (CUCM) Software • Administrator guide (this guide): Information required to administer your product You can download the software for your product from the •...
  • Page 6: What's New In This Version

    An input is available for presentation only when a content source (e.g. a PC) is connected to that input. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 7 <ContacList/MeetingList/Dialpad> NEW: <None/LastUsed/ContacList/MeetingList/Dialpad> Video Input Source [n] PresentationSelection OLD: <Manual/Automatic/Hidden> NEW: <Manual/Automatic/OnConnect/Hidden> Video WallPaper OLD: <None/Custom/Growing/Summersky/Waves> NEW: <None/Custom/Growing/Summersky/Waves/Blue> D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 8: Profile 42" Using Codec C40 At A Glance

    • Remote control with AAA batteries Base options Floor standing footplate, wheel base, or wall mount on pedestal D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 9: Profile 52"/55" At A Glance

    (Profiles using Codec C40) Floor standing footplate, wheel base, or wall mount on pedestal (Profiles using Codec C60) D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 10: Profile 52" Dual / 55" Dual At A Glance

    Touch 8 controller • Remote control with AAA batteries Base options Floor standing footplate or wall mount on pedestal D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 11: Profile 65" At A Glance

    Wall mount on pedestal) • Remote control with AAA batteries Base options Floor standing footplate or wall mount on pedestal D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 12: Codec C60 At A Glance

    • Full APIs. • Ensure successful, streamlined integration projects with standards-compliant professional connectors. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 13: Codec C40 At A Glance

    • Full APIs. • Ensure successful, streamlined integration projects with standards-compliant professional connectors. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 14: Web Interface

    Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Chapter 2 Web interface D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 15: Accessing The Web Interface

    Touch controller. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 16: Changing The System Password

    If the password currently is not set, leave Current password field blank. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 17: The Interactive Menu

    You can read more about user administration, user roles and access rights in the ► User administration section. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 18: System Information

    The system information shown in the illustration serve as an example. Your system may be different. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 19: Placing A Call

    URI or number. click the button for that participant is on hold. participant. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 20: Sharing Content

    2. Click Start Presentation. Stop content sharing: Click the Stop Presentation button that is present while sharing. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 21: Controlling And Monitoring A Call

    Click the button again to hide the information. Call details If necessary, scroll your browser to see the call details. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 22: Controlling Your Camera

    Click the preset’s name to move the camera(s) to the preset position. Click to close the window. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 23: Local Layout Control

    Layout, and choose your preferred layout in the window that opens. You may change the layout while in a call. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 24: Capturing Snapshots

    Snapshots from your video system that appears when you tap the contact information in the upper, left corner of the Touch controller. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 25: Controlling The Far End Camera

    3. Use the left and right arrows to pan the camera; the up and down arrows to tilt it; and to zoom in and out. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 26: Accessing Call Information

    Opening the Call Control page Click Open Call Control to go straight to the Call Control page. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 27: System Configuration

    The configuration shown in the illustration serve as an example. Your system may be configured differently. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 28: Changing System Settings

    The configuration shown in the illustration serve as an example. Your system may be configured differently. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 29: Setting The Administrator Settings Menu Password

    Click without entering a password to leave the Administrator menu unprotected (not recommended). D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 30: System Status

    The status shown in the illustration serve as an example. The status of your system may be different. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 31: Managing The Favorites List

    Note that only the first contact method will appear in the Favorites list on the Cisco TelePresence Touch controller. All contact methods are available when using the remote control. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 32: Favorite List Folders

    Confirm your choice in the dialog that pops up. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 33: Choosing A Wallpaper

    1920 × 1200 pixels. predefined wallpapers. Click Upload to save the file on the video system. The chosen wallpaper is highlighted. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 34: Choosing A Ringtone

    Use the stop button (   ) to end the playback. You must save the ringtone before it can be played back. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 35: Peripherals Overview

    The peripherals shown in the illustration serve as examples. Your system may have different peripherals and video input/output configurations. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 36: User Administration

    An administrator user account with full access rights, like the default admin user, must possess all the three roles. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 37 PIN code is used with the remote control and on-screen menu when the Video OSD LoginRequired setting is switched On. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 38 PIN code is used with the remote control and on-screen menu when the Video OSD LoginRequired setting is switched On. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 39 1. Click the name of an existing user to open the Editing user window. 2. Click Delete <user name>... and confirm when prompted. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 40: Adding A Sign In Banner

    Enter the message that you want to present to the user when signing in, and click Save to activate the banner. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 41: Managing Startup Scripts

    The script name and commands shown in the illustration serve as appears next to an inactive script. examples. You may make your own scripts. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 42: Profile

    Enter a command, or a sequence of commands, in the text area and click Execute to issue the command(s). D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 43: Managing The Video System's Certificates

    The certificates and certificate issuers shown in the illustration serve as examples. Your system may have other certificate(s). D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 44: Managing The List Of Trusted Certificate Authorities

    The certificate and certificate issuers shown in the illustration serve as examples. Your system will have other certificate(s). D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 45: Adding Audit Certificates

    Choose ExternalSecure from the Logging Mode drop-down list. Click Save for the change to take effect. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 46: Setting Strong Security Mode

    Disable strong security mode..2. The system will restart automatically. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 47: Changing The Persistency Mode

    You can also see the status by checking Security > Persistency on the Configuration > System Status page. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 48: Deleting Trust Lists (Cucm Only)

    For more information about CUCM and trust lists, read the Administering TC Endpoints on CUCM guide available on the Cisco web site. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 49: Troubleshooting

    The messages shown in the illustration serve as examples. Your system may show other information. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 50: Downloading Log Files

    The log files shown in the illustration serve as examples. Your system may have other files. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 51: Upgrading The System Software

    Click Browse... and find the downloaded .pkg file that contains the new software. Release key If you do not have the required key(s), contact your Cisco ii. Check the Upgrade automatically after upload check representative to obtain them. You need a valid release key to be able to use the video...
  • Page 52: Backup And Restore

    Click Restore to reconfigure the system as defined in the file. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 53: System Recovery: Revert To The Previously Used Software Version

    Reverting to the previously used software version should only be done by a system administrator or in contact with Cisco technical support. We strongly recommend that you backup your system’s log files and configuration before you swap to the other software image.
  • Page 54: System Recovery: Factory Reset

    Read about software swapping in the ► System recovery: Revert to the previously used software version section. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 55: Restarting The System

    The system cannot be turned on again remotely; you must press its power button physically to turn it on. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 56: System Settings

    Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Chapter 3 System settings D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 57: Overview Of The System Settings

    Conference [1..1] Multipoint Mode .......... 73 Audio Output Line [2] Type ............65 corner of the Touch controller. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 58 Security Session InactivityTimeout ......... 97 Network [1..1] IEEE8021X Identity ..........84 NetworkServices MultiWay Protocol ........89 Security Session ShowLastLogon .......... 97 D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 59 Video Layout ScaleToFrameThreshold ........114 SystemUnit settings ............104 Video Layout Scaling .............113 SystemUnit CallLogging Mode ..........104 D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 60: Audio Settings

    On: A video source is associated, and the audio will be muted if the associated video source is not displayed. Audio Input HDMI 2 VideoAssociation MuteOnInactiveVideo: Off Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 61 Mono: The Audio Line input signal is a mono signal. Audio Input Line 1 Mode: On Example: Audio Input 1 Channel: Left Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 62 Off: No equalizer. On: Enable the equalizer for the audio input microphone. Audio Input Microphone 1 Equalizer Mode: Off Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 63 Range: Select a value from -24 to 0dB. Audio Input Microphone 1 Level: 15 Example: Audio Output HDMI 1 Level: 0 Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 64 Determine if the Audio Line output will be analog or digital type output. The digital output on the Select the audio output line equalizer ID. Cisco TelePresence Profile systems are identified as DNAM (Digital Natural Audio Module). Requires user role: ADMIN Requires user role: ADMIN Value space: <1..8>...
  • Page 65: D14636.13 Profile C60-C40 And Codec C60-C40 Administrator Guide Tc7.0, December

    -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched off. Audio Volume: 70 Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 66: Cameras Settings

    Value space: <1..31> Range: Select a value from 1 to 31. Cameras Camera 1 Brightness Level: 1 Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 67 By setting the Gamma Level you can select which gamma correction table to use. This setting may be useful in difficult lighting conditions, where changes to the brightness setting does not This setting applies only when using a Cisco TelePresence PrecisionHD 1080p12x camera. provide satisfactory results. Requires the Gamma Mode to be set to Manual.
  • Page 68 To see the result, you can run the following API command: "xStatus Camera". When the camera no longer is connected to a LAN, set to Off. Cameras Camera 1 DHCP: Off Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 69: Conference Settings

    Timed: When set to timed (default), the system will revert back and allow incoming calls after the specified timeout, defined by the setting: Conference DoNotDisturb DefaultTimeout. Conference 1 DoNotDisturb Mode: Timed Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 70 Off: Disable the far end control signal capability. On: Enable the far end control signal capability. Conference 1 FarEndControl SignalCapability: On Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 71 Range: Select a value between 64 and 10000. Conference 1 MaxReceiveCallRate: 6000 Example: Conference 1 MaxTotalReceiveCallRate: 10000 Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 72 Conference 1 Presentation OnPlacedOnHold: NoAction Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 73 Allow: You will be notified when someone calls you while you are already in a call. You can If registered to a Cisco Unified Communications Manager (CUCM) version 8.6.2 or newer, the accept the incoming call or not. The ongoing call may be put on hold while answering the video system can use either the CUCM conference bridge, or the video system's own built-in incoming call;...
  • Page 74: Facilityservice Settings

    Value space: <S: 0, 255> Format: String with a maximum of 255 characters. FacilityService Service 1 Name: "" Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 75: Gpio Settings

    InputMuteMicrophones: When the pin is activated (0 V), the microphones will be muted. When deactivated (+ 12 V), the microphones are unmuted. GPIO Pin 1 Mode: InputNoAction Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 76: H323 Settings

    Value space: <S: 0, 64> Format: A valid IPv4 address or IPv6 address. H323 NAT Address: "" Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 77 If no Gatekeeper responds, the system will not use a Gatekeeper for making H.323 calls and hence an IP address must be specified manually. H323 Profile 1 Gatekeeper Discovery: Manual Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 78 Static: When set to Static the ports are given within a static predefined range [5555-6555]. H323 Profile 1 PortAllocation: Dynamic Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 79: Logging Settings

    Web interface System settings System settings Setting passwords Appendices Logging settings Logging Mode Not applicable in this version. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 80: Network Settings

    DHCPv6 server. The Network IPv6 DHCPOptions setting determines which method to use. Network 1 IPv6 Assignment: Autoconf Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 81 Network [1..1] DHCP RequestTFTPServerAddress Enter the static IPv6 network address for the system. This setting is only applicable when the This setting is used only for video systems that are registered to a Cisco Unified Network IPv6 Assignment is set to Static.
  • Page 82 0 (best effort). Network 1 QoS Diffserv Audio: 0 Example: Network 1 QoS Diffserv Data: 0 Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 83 Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort). Network 1 QoS Diffserv ICMPv6: 0 Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 84 Value space: <S: 0, 64> Format: String with a maximum of 64 characters. Network 1 IEEE8021X Identity: "" Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 85 Set the network traffic control mode to decide how to control the video packets transmission Set the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN clients speed. without the need for client certificates. Developed by Microsoft, Cisco and RSA Security. Requires user role: ADMIN Requires user role: ADMIN Value space: <Off/On>...
  • Page 86 Requires user role: ADMIN Value space: <Auto/Manual/Off> Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP is not available, VLAN is not enabled. Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If CDP is available, the manually set value will be overruled by the value assigned by CDP.
  • Page 87: Networkport Settings

    Appendices NetworkPort settings NetworkPort [2] Mode Define if the network port 2 shall be enabled for direct pairing with a Cisco TelePresence Touch screen control panel. NOTE: Restart the system for any change to this setting to take effect. Requires user role: ADMIN Value space: <Inactive/DirectPairing>...
  • Page 88: Networkservices Settings

    Off: The XML API is disabled. NetworkServices SIP Mode: On Example: On: The XML API is enabled (default). NetworkServices XMLAPI Mode: On Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 89 Example: Off: The HTTPS protocol is disabled. On: The HTTPS protocol is enabled. NetworkServices HTTPS Mode: On Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 90 SNMP Agent in the codec. The default password is "public". If you have the Cisco TelePresence Management Suite (TMS) you must make sure the same Enter the NTP Address to define the network time protocol server address. This address will SNMP Community is configured there too.
  • Page 91 NetworkServices SNMP SystemContact NetworkServices CTMS Mode Enter the name of the Network Services SNMP System Contact. This setting determines whether or not to allow multiparty conferences controlled by a Cisco TelePresence Multipoint Switch (CTMS). Requires user role: ADMIN Video systems running software TC5.0 or later are able to initiate or join non-encrypted Value space: <S: 0, 50>...
  • Page 92: Phonebook Settings

    VCS: Select VCS if the phonebook is located on the Cisco TelePresence Video Communication Server. TMS: Select TMS if the phonebook is located on the Cisco TelePresence Management Suite server. Callway: Select Callway if the phonebook is to be provided by the WebEx TelePresence subscription service (formerly called CallWay).
  • Page 93: Provisioning Settings

    Provisioning HttpMethod Off: The video system will not be configured by a provisioning system. Select the HTTP method to be used for the provisioning. TMS: The video system will be configured using TMS (Cisco TelePresence Management Requires user role: ADMIN System).
  • Page 94 Value space: <S: 0, 64> Format: String with a maximum of 64 characters. Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager (CUCM) and an alternate CUCM is available for redundancy. Enter the address of the alternate Provisioning ExternalManager Domain: "any.domain.com"...
  • Page 95: Rtp Settings

    Requires user role: ADMIN Value space: <1056..65535> Range: Select a value from 1056 to 65535. RTP Ports Range Stop: 2486 Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 96: Security Settings

    Manual: Will use the port value defined in the Security Audit Server Port setting. Example: Security Audit Server PortAssignment: Auto Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 97 Range: Select a value between 1 and 10000 seconds; or select 0 when inactivity should not enforce automatic logout. Security Session InactivityTimeout: 0 Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 98: Serialport Settings

    Off: The user can access the codec via the serial port without any login. On: Login is required when connecting to the codec via the serial port. SerialPort LoginRequired: On Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 99: Sip Settings

    SIP ListenPort: On Example: SIP OCSP Mode Not applicable in this version. SIP OCSP DefaultResponder Not applicable in this version. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 100 On: When set to On, the system will search for available Turn servers in DNS, and before making calls the system will test if port allocation is possible. SIP Profile Turn DiscoverMode: On Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 101 Format: String with a maximum of 128 characters. SIP Profile 1 TlsVerify: Off Example: SIP Profile 1 Authentication 1 LoginName: "" Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 102 Off: Connect to the single proxy configured first in Proxy Address list. On: Set up multiple outbound connections to servers in the Proxy Address list. Standard: Use this when registering to standard SIP Proxy (tested with Cisco TelePresence VCS and Broadsoft)
  • Page 103: Standby Settings

    DefaultCameraPosition: After a reboot the camera position will be set to the factory default position. Standby BootAction: DefaultCameraPosition Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 104: Systemunit Settings

    Requires user role: ADMIN Value space: <Off/On> Off: Disable logging. On: Enable logging. SystemUnit CallLogging Mode: On Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 105 Off: Disable the IR sensor on the codec. On: Enable the IR sensor on the codec. SystemUnit IrSensor: Auto Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 106: Time Settings

    Range: Select a time zone from the list time zones. If using a command line interface; watch up for typos. Time Zone: "GMT (Greenwich Mean Time : Dublin, Edinburgh, Lisbon, Example: London)" D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 107: Userinterface Settings

    On: The user preferences are available from the Settings menu on the Touch screen control panel. UserInterface UserPreferences: On Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 108: Video Settings

    Range: Choose for how long self-view remains on. The valid range is between 1 and 60 seconds. Video CamCtrlPip CallSetup Duration: 10 Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 109 (16 - 235). This is defined in CEA-861-E. Video Input 1 HDMI 1 RGBQuantizationRange: Auto Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 110 Video Input Source 1 Visibility: IfSignal Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 111 Rather high resolutions will be used. Video Input Source 1 OptimalDefinition Profile: Normal Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 112 DisabledPIPs: The built-in layout engine does not display any PIP frame in the layout on the local output. Video Layout Engine LocalMode: Enabled Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 113 Maximized: The presentation starts up in full screen mode. Video Layout Scaling: On Example: Video Layout PresentationDefault View: Default Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 114 LowerRight: The presentation PiP will appear in the lower right corner of the screen. Video PIP Presentation DefaultValue Position: Current Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 115 LowerRight: The self-view PiP will appear in the lower right corner of the screen. Video SelfviewDefault FullscreenMode: Current Example: Video SelfviewPosition: LowerRight Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 116 On: The Wallpaper menu will be available from the Settings menu. Video SelfviewDefault OnMonitorRole: Current Example: Video OSD WallpaperSelection: On Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 117 AlwaysOn: The virtual keyboard is automatically shown on screen as long as text can be entered in an input field. Video OSD VirtualKeyboard: UserSelectable Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 118 Off: Do not display todays bookings. On: Displays information about this systems bookings on screen. Video OSD TodaysBookings: Off Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 119 Latin: Latin characters can be entered when using the remote control (default). Value space: <Auto/Full/Limited> Cyrillic: Cyrillic characters can be entered using the remote control. Requires a Cisco Auto: RGB quantization range is automatically selected based on the RGB Quantization TelePresence Remote Control with Cyrillic fonts.
  • Page 120 (16 - 235). This is defined in CEA-861-E. Video Output DVI 2 RGBQuantizationRange: Full Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 121 Recorder: Show all participants, including the local main video. If active, also show the presentation. Video Output Composite 3 MonitorRole: Auto Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 122 1920x1200. Summersky, Growing, Waves: The chosen background image is shown on the screen. Video Wallpaper: Summersky Example: D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 123: Experimental Settings

    Appendices Experimental settings The Experimental settings are for testing only and should not be used unless agreed with Cisco. These settings are not documented and WILL change in later releases. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
  • Page 124: Setting Passwords

    Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide Contents Introduction Web interface System settings Setting passwords Setting passwords Appendices Chapter 4 Setting passwords D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 125: Setting The System Password

    You can read more about how to create and manage user accounts in the ► User administration section. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 126: Setting The Menu Password

    Touch controller: Tap the upper, left corner of the Touch controller to open the drop down window. Then Settings > System Information. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 127: Setting A Root Password

    3. Type the following command: systemtools rootsettings on <password> The root password is not the same as the system (admin) password. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 128: Appendices

    Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices Appendices D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 129: Cisco Vcs Provisioning

    Take care to use the correct file. Read the Cisco TMS Provisioning Deployment Guide to find how to upload the file to Cisco TMS, and how to set the desired values for the parameters to be provisioned. If not set by Cisco TMS, the default values will be used.
  • Page 130: About Monitors When You Have A Codec C60

    Open the System Configuration page. Go to Video > OSD > Output and choose the video output connector for the main monitor. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 131: About Monitors When You Have A Codec C40

    Open the System Configuration page. Go to Video > OSD > Output and choose the video output connector for the main monitor. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 132: Connecting The Cisco Telepresence Touch 8 Controller

    You will find this setting in the Advanced Configuration on-screen menu (remote control) or in the System Configuration page on the web interface. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 133: Advanced Customization Of Video And Audio

    Download the TC Console application for free from the Cisco Developer Network (CDN) web site. Go to: ► http://developer.cisco.com/web/telepresence-developer GPIO D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 134: Optimal Definition Profiles

    The resolution will be 1920 × 1080 for 1080p60 capable C60 codecs (main board rev F and later). D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 135: Clearpath — Packet Loss Resilience

    Navigate to Conference 1 > PacketLossResilience > Mode Choose Off to disable ClearPath and On to enable ClearPath. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 136: Requirement For Speaker Systems Connected To A Cisco Telepresence C Series Codec

    Requirement for speaker systems connected to a Cisco TelePresence C Series codec Cisco has put in a lot of effort to minimize the camera to screen delay on our TelePresence endpoints. New consumer TVs are usually equipped with “Motion Flow”...
  • Page 137: Dnam For Profile 42"/52"/55

    Some DNAM amplifier models are delivered without XLR connectors, and with a different RCA connector placement. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 138: Dnam For Profile 65

    When reinserting the fuse and fuse holder, push slightly inwards and turn the holder carefully clockwise until it locks in place. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 139: Factory Resetting The Codec

    Touch controller. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 140: Factory Resetting The Touch 8 Control Panel

    3. Press the Mute button twice. The Touch controller automatically reverts to the default factory settings and restarts. D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 141: Technical Specifications

    ** Multiwindow compositing not supported on the dual stream • 800 × 600@60 Hz (SVGA) *** Not supported on 4 x zoom camera D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 142 Requires option ** Multiwindow compositing not supported on the dual stream *** Not supported on 4 x zoom camera D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 143 All images in these materials are for representational purposes only, actual products may differ. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A ISO 9001 certificate is available upon request listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks.
  • Page 144 DIRECTORY SERVICES AUDIO INPUTS (7 INPUTS) The same as Codec C60 The same as Codec C60 * Requires option D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 145 All images in these materials are for representational purposes only, actual products may differ. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A ISO 9001 certificate is available upon request listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks.
  • Page 146 All images in these materials are for representational purposes only, actual products may differ. Power On Hours (POH) > 69 000 hours Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. Useful Life Cycle > 6 years A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks.
  • Page 147 DIRECTORY SERVICES The same as Codec C40 AUDIO INPUTS (5 INPUTS) The same as Codec C40 * Requires option D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 148 All images in these materials are for representational purposes only, actual products may differ. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the ISO 9001 certificate is available upon request property of their respective owners.
  • Page 149: Supported Rfcs

    RFC 3890 A Transport Independent Bandwidth Modifier Feedback for SDP • RFC 4587 RTP Payload Format for H.261 Video Streams D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
  • Page 150: User Documentation On The Cisco Web Site

    Setting passwords Appendices Appendices User documentation on the Cisco web site In general, user documentation for the Cisco TelePresence products is available here: The documents are organized in the following categories: Installation guides: ► http://www.cisco.com/go/telepresence/docs Install and Upgrade > Install and Upgrade Guides You have to choose your product category in the right pane until you find your product.
  • Page 151: Cisco Contacts

    DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE- On our web site you will find an overview of the worldwide Cisco contacts. NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF Go to: ►...

Table of Contents