Basic Installation Steps; Safety Instructions; Tools And Materials - Xantrex SOLAR 784-0110 Installation Manual

Basic Installation Steps

Safety Instructions

Before beginning your installation:
Read this entire Installation section so you can plan the installation from beginning to end.
n
Assemble all the tools and materials you require for the installation.
n
Be aware of all safety and electrical codes which must be met.
n
ELECTRICAL SHOCK AND FIRE HAZARD
The power system must be designed by a certified vehicle solar system designer and installed
n
by a certified solar system technician.
All wiring should be done by qualified personnel to ensure compliance with all applicable
n
installation codes and regulations.
Disconnect all power sources.
n
Disable and secure disconnect devices.
n
Failure to follow these instructions can result in death, serious injury, or equipment
damage

Tools and Materials

You may need the following tools to install the Solar Max Flex Panel:
Wrench set
n
Torque driver
n
1. Plan the power system and where to mount the solar panel.
975-1029-01-01 Rev B
June 2022
WARNING
a. The Xantrex Solar Max Flex Panel comes in the following power levels:
110 W standard, 110 W slim, 220 W, and 330 W
b. Draw your power system on paper similar to Figure 1 .
Figure 1 Cable Schematic
1 Solar panel
See section on Solar PanelWiring for more
information.
2 Charge controller (PWM or MPPT)
See section on Solar PanelWiring for more
information.
1
3 DC fuse (or batterydisconnect)
4 Battery(12Vor 24V)
2
3
4
6