Selective Call - Icom IC-F8100 Instruction Manual

ï Selective call
The Selcall allows you to make individual or group
calls. Each transceiver is assigned an individual ID
(identification) and can be called using this ID.
• Preparation for Selective call
Sending a Channel Test call on several Selcall chan-
nels, and check the propagation on each channel to
select the channel of good signal quality. (p. 30)
• Sending Selective call
q On the Memory Channel display, push
.
the Call select menu
w Push t or u
[ ](§) [ ](§§§)
Call, then push
[ ] to enter
e Push t or u
[ ](§) [ ](§§§)
the Call type.
• "SELECTIVE," "PHONE," "MESSAGE," "SEND POSITION,"
"GET POSITION," "GET STATUS," "EMERGENCY" and
"CHANNEL TEST" are selectable.
r Push to go to the next screen.
[ ]
• Push [HOME] to return to the previous screen.
❍ Call ID input
Push the numeric keys to enter the Call ID.
• Push [8] to delete the number.
• This Call ID is not stored in the Call ID list.
❍ Call ID selection
Push [List]
(§ § )
➥
mode.
Push t or u
[ ](§) [
➥
• Push [Edit](§§) to return to the direct input mode.
t Push to go to the next screen.
[ ]
• Push [HOME] to return to the previous screen.
❍ Network selection
Push t or u
[ ](§) [ ](§§§)
[ ] to enter
to select "SELCALL" as the
the Selcall menu.
to select "SELECTIVE" as
to enter the list selection
to select the Call ID.
](§§§)
to select the Network.
SELCALL/ALE OPERATION
y Push to go to the next screen.
[ ]
• Push [HOME] to return to the previous screen.
❍ Self ID selection
Push t or u
[ ](§) [ ](§§§)
❍ Self ID input
Push [Edit]
to enter the direct input mode.
(§§)
➥
Push the numeric keys to enter the Self ID.
➥
• Push [8] to delete the number.
• This Self ID is overwritten or stored in the Self ID list.
• Push [List](§§) to return to the list selection mode.
u Push to enter the Channel Menu, and then
[ ]
push or
[ t ](§) [ u ](§§§)
ing channel.
• Push [HOME] to return to the Selcall menu.
i Push to transmit the Selective call. The call is
[ ]
stored in the Call Out memory.
• While calling, push [PTT] to cancel the call.
You can also transmit a Selective call when show-
ing the Selcall Address display. In this case, you
can skip steps q to t above, after selecting the
Selective call address.
• Receiving Selective call
When a transceiver receives a Selective call with your
individual ID, it automatically responds by transmitting.
The received Selcall is stored in the Call In memory.
q After receiving a Selective call, and push any key
to enter the Call In memory.
w Push [More] or [Prev]
(§§§)
tion.
e Push to return to the normal operating
[Home]
screen.
to select the Self ID.
to select the desired operat-
to select the informa-
(§)
4
4
20