To Switch To The Alom Prompt; To Switch To The Server Console Prompt - Sun Microsystems Fire V210 Administration Manual

Tip – For additional information see: http://docs.sun.com. Search for ALOM to
find the ALOM documentation.
3.4.1

To Switch to the ALOM Prompt

●
Type the following:
# #.
Note – When you switch to the ALOM prompt, you are logged in with the userid
"admin". See
3.4.2

To Switch to the Server Console Prompt

●
Type the following:
sc> console
More than one ALOM user can be connected to the server console stream, but only
one user is permitted to type input characters to the console.
If another user is logged on and has write capability, you will see the following
message after issuing the console command:
sc> Console session already in use. [view mode]
To take console write capability away from another user, type:
sc>
3-6 Sun Fire V210 and V240 Servers Administration Guide • December 2005
Section 3.3, "Setting the admin Password" on page
console -f
3-5.