Using Probe-Ide Command To Confirm That The Dvd Or Cd-Rom Drive Is Connected - Sun Microsystems Fire V210 Administration Manual

CODE EXAMPLE 6-16
ok probe-scsi-all
/pci@1f,0/pci@1/scsi@8,1
/pci@1f,0/pci@1/scsi@8
Target 0
Unit 0
Target 1
Unit 0
6.10.2 Using probe-ide Command to Confirm That the
DVD or CD-ROM Drive is Connected
The probe-ide command transmits an inquiry command to internal and external
IDE devices connected to the system's on-board IDE interface. The following sample
output reports a DVD drive installed (as Device 0) and active in a server.
CODE EXAMPLE 6-17
ok probe-ide
Device 0
Device 1
Device 2
Device 3
6-28 Sun Fire V210 and V240 Servers Administration Guide • December 2005
probe-scsi-all Output Message
Disk SEAGATE ST336605LSUN36G 4207
Disk SEAGATE ST336605LSUN36G 0136
probe-ide Output Message
( Primary Master )
Removable ATAPI Model: DV-28E-B
( Primary Slave )
Not Present
( Secondary Master )
Not Present
( Secondary Slave )
Not Present