Removing And Replacing Hard Drives; Removing A Hard Drive; Figure 2-3 Inserting A System Configuration Card (Sun Fire V210 Server); Section 2.5, "Removing And Replacing Hard Drives - Sun Microsystems Fire V210 Administration Manual

Hide thumbs Also See for Fire V210:
Table of Contents

Advertisement

Cable tie
FIGURE 2-3
2.5

Removing and Replacing Hard Drives

Caution – The server and hard drives contain electronic parts that are extremely
sensitive to static electricity. Wear a grounded antistatic wrist strap when you carry
out this procedure.
2.5.1

Removing a Hard Drive

The hard drives are hot-pluggable modules. If more than one is fitted, you can install
or remove a hard drive without powering off the server or removing it from the
rack.
However, you do need to make sure that no system or application software is using
a hard drive when you remove it.
System configuration card
Inserting a System Configuration Card (Sun Fire V210 Server)
Chapter 2 Removing and Replacing Components
2-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fire v240

Table of Contents