To Turn The Locator Led On; To Turn The Locator Led Off - Sun Microsystems Fire V210 Administration Manual

TABLE 1-2
Indicator
Service
Required
Locator
You can turn the Locator LED on and off either from the system console or the Sun
Advanced Light Out Manager (ALOM) command–line interface (CLI).
1.2.2

To Turn the Locator LED On

●
Do one of the following:
As root, type
■
# /usr/sbin/locator -n
At the ALOM command-line interface, type:
■
sc> setlocator on
1.2.3

To Turn the Locator LED Off

●
Do one of the following:
As superuser, type:
■
# /usr/sbin/locator -f
At the ALOM command-line interface, type:
■
sc> setlocator off
Server Status Indicators
LED color LED State
Yellow On
Off
White On
:
Meaning
The server has detected a problem and
requires the attention of service personnel.
The server has no detected faults.
Identifies the server from others in a rack.
Chapter 1 Introduction 1-7