2.1
Replaceable Components
Open the bezel to access these components:
System Configuration Card
■
Hard drives
■
DVD-ROM drive
■
Note – Access to any other component requires the removal of the server's lid, and
involves procedures that must be carried out by trained personnel only.
2.2
Avoiding Electrostatic Discharge
2.2.1
Avoiding Electrostatic Discharge While Working
on the Front Panel
1. Attach one end of the antistatic wrist strap to your wrist.
2. Attach the other end to a grounding stud on the rack or cabinet.
2.2.2
Opening the Front Bezel
1. Ensure that you are properly grounded.
See
Section 2.2.1, "Avoiding Electrostatic Discharge While Working on the Front
Panel" on page
2. Open the bezel by rotating it down on its hinges.
2-2
Sun Fire V210 and V240 Servers Administration Guide • December 2005
2-2.