To Find Out Whether Sunvts Is Installed; Installing Sunvts - Sun Microsystems Fire V210 Administration Manual

TABLE 5-1
SunVTS Test
env6test
ssptest
i2c2test
5.1.3

To Find Out Whether SunVTS Is Installed

●
Type the following:
# pkginfo -l SUNWvts
If SunVTS software is loaded, information about the package is displayed.
■
If SunVTS software is not loaded, you see the following error message:
■
ERROR: information for "SUNWvts" was not found
5.1.4

Installing SunVTS

By default, SunVTS is not installed on the Sun Fire V210 and V240 servers. However,
it is available on the software supplement CD supplied with the Solaris OS. For
information about downloading it from this CD, refer to the Sun Hardware Platform
Guide for the release of the Solaris OS you are using.
To find out more about using SunVTS, refer to the SunVTS documentation that
corresponds to the Solaris OS release that you are running.
5-4 Sun Fire V210 and V240 Servers Administration Guide • December 2005
SunVTS Tests
Description
Tests temperature sensors, power supply status, fan speeds, and
keyswitch position. Test LEDs by toggling them on and off.
Tests functionality of ALOM hardware. Test onboard Ethernet, flash
ram, SEEPROM, TOD, I
system, and serial ports.
Verifies all available I
Performs data checking for SCC and FRU SEEPROM devices.
2
C connections from ALOM to the host
2
C devices and the system bus connections.