Psrinfo Command - Sun Microsystems Fire V210 Administration Manual

CODE EXAMPLE 6-11
# prtfru -c
/frutree/chassis/MB?Label=MB/system-board (container)
Data displayed by the prtfru command varies depending on the type of FRU. In
general, it includes:
FRU description
■
Manufacturer name and location
■
Part number and serial number
■
Hardware revision levels
■
6.7.2.4

psrinfo Command

The psrinfo command displays the date and time each CPU came online. With the
verbose (-v) option, the command displays additional information about the CPUs,
including their clock speed. The following is sample output from the psrinfo
command with the -v option.
CODE EXAMPLE 6-12
# psrinfo -v
Status of processor 0 as of: 09/20/02 11:35:49
Processor has been on-line since 09/20/02 11:30:53.
The sparcv9 processor operates at 960 MHz,
Status of processor 1 as of: 09/20/02 11:35:49
Processor has been on-line since 09/20/02 11:30:52.
The sparcv9 processor operates at 960 MHz,
prtfru -c Command Output
SEGMENT: SD
/SpecPartNo: 885-0092-02
/ManR
/ManR/UNIX_Timestamp32: Wednesday April 10 11:34:49 BST 2002
/ManR/Fru_Description: FRUID,INSTR,M'BD,0CPU,0MB,ENXU
/ManR/Manufacture_Loc: HsinChu, Taiwan
/ManR/Sun_Part_No: 3753107
/ManR/Sun_Serial_No: abcdef
/ManR/Vendor_Name: Mitac International
/ManR/Initial_HW_Dash_Level: 02
/ManR/Initial_HW_Rev_Level: 01
psrinfo -v Command Output
and has a sparcv9 floating point processor.
and has a sparcv9 floating point processor.
Chapter 6 Diagnostics 6-23