Monitor Switching - EverFocus ECOR 264x1-16 Instruction Manual

3.11 Monitor Switching

The DVR can connect to main monitor and call monitors simultaneously, but only one of them can be
controlled at one time. This feature allows user to switch control between three monitors.
Switch control by using a mouse
Click on "Monitor" button in menu for toggling operation between MAIN and CALL monitor.
Status display of MONITOR button:
: The MAIN monitor is selected. Press the button for switching to CALL monitor operation.
: The CALL monitor is selected. Press the button for switching to MAIN monitor operation.
Switch control from front panel
Click "Monitor" button on front panel to toggle monitor control between MAIN and CALL monitor.
Note: Holding MONITOR key (>1 second) will switch Main monitor display between VGA and BNC
output. The deactivated video output will show a message:
" The monitor is currently unavailable. Please hold "Monitor" key to switch."
Operation of Call Monitor OSD
If the CALL monitor is selected, the OSD main menu will be limted to the functions, which are available at
CALL monitor (no playback / search / copy / setup functions).
The OSD menu is shown on MAIN monitor.
View Click this button to change the multi-view mode.
Change Switch channels.
Display Turn OSD display on/ off.
Sequence Turn sequence on/off.
Monitor Click this button switch control to main monitor.
29