Table of Contents
Advertisement
4.5 Alarm & Event Setting
Figure 4-10 is a screenshot of the ALARM & EVENT SETTING MENU. This menu will walk you through
alarm and event setup.
4.5.1
Alarm
Alarm
Enable
Log
Pre-alarm Record
Buzzer
Main Monitor
Call Monitor
Record
Email Notify
Figure 4-10 Alarm & Event Menu - Alarm
Select the alarm input from 1 to 4/9/16.
Check box to enable response to that alarm trigger.
Check box to record these alarm events in the log.
Check box to start copying recorded video to the hard disk from several moments
before the alarm event. (Pre-alarm recording rate will follow "Normal" frame rate
setting)
Check this box to enable the buzzer when an alarm occurs.
Main monitor display options when a motion occurs.
No change
No change on the main monitor display.
Full screen
A full screen of the active camera will display on main monitor
Call monitor display options when a motion occurs.
No change
No change on the main monitor display.
Full screen
A full screen of the active camera will display on main monitor.
Select which camera(s) will start recording in response to this alarm event.
Check box to enable email notification when an alarm occurs. Email operation
requires that valid email settings have been entered in the Network Setting/Email
50
Advertisement
Table of Contents
