Table of Contents
Advertisement
Time Stamp
Record Status
Relay Output
Auto Erase Video
4.4.2
Built-in Calculator
The built-in record period calculator can give a rough estimation of the total recording time for the DVR with
current settings. In order to compute as accurate an estimate as possible, please enter your estimates for
the hours per day you expect recording to take place due to motion events and due to other alarm
conditions.
Motion
Enter the expected number of hours per day due to motion recording.
Alarm
Enter the expected number of hours per day due to alarm recording.
If the total Motion and Alarm hours is more than 24 hours, the calculator will assume that
motion and alarm recording take place for the entire 24 hour period.
Click on the
" xx days of data can be stored based on current setting"
mode. When schedule recording is disabled, as the default the DVR will
automatically begin recording when it is first turned on.
Select if the time and date will display while recording. Choose the
location for the time display from Top, Bottom or Off.
The ECOR264 allows monitoring the record status at a relay output
None: Relay will not react on record mode change
1 ~ 4: Select 1 relay output 1 to 4. (for 4 channel version only 1
available).
The relay is active (powered) in record mode ON, so it will also
react in case of power loss.
The hard drive will automatically erase video after it has been on the hard
drive for the selected number of days. To use the maximum hard drive
space, choose "OFF". (See Record Overwrite and notes above.)
Figure 4-8 Record & Play Menu-Built-in Cal.
" " button to display the result at the bottom of the screen:
"ESTIMATE"
48
Advertisement
Table of Contents
