Schedule - EverFocus ECOR 264x1-16 Instruction Manual

4.6.3

Schedule

Controls camera recording mode by time of day on specific days of the week and/or holidays and 'other'
days.
Note: All schedule settings are active only, if the check box "SCHEDULE RECORD" in
RECORD menu is activated !
Camera Select a camera number to change the schedule for that camera.
Each camera can be controlled during a 24 hour time block for Holiday (Hol), Other (Oth),
Sunday (Sun), Monday (Mon), Tuesday (Tue), Wednesday (Wed), Thursday (Thu), Friday
(Fri), or Saturday (Sat).
Time Bar The time bar uses three different colors to distinguish each recoding mode.
Gray (No Rec) No recording during this time block.
Orange (E)
Blue (N+E)
To Set Schedule using Mouse
1. Click on desired start time block (no numbers on it) on a time bar. At this time, the selected block will
be highlighted in blue frame and the selected time bar will be highlighted by red frame.
There are 24 blocks on the time bar representing 24 hours respectively. Set a schedule start time
by clicking on a desired start time block on a time bar and clicking again to confirm it. At this time,
the selected block and all following blocks will turn gray, which means this gray timezone has been
set to the recording mode of gray (No Rec).
Figure 4-22 Schedule Menu-Schedule
Only events are recorded during this time block.
(Default) Normal and event recording during this time block.
63