Direct High Speed Modem Connection - EverFocus ECOR 264x1-16 Instruction Manual

5.8 Direct High Speed Modem Connection

Straight Through Ethernet Cable Pin outs:
The Figure below shows the pin configurations for a straight cable.
Connection Procedure:
 The first step is to purchase or make a straight through cable. We recommend purchasing one if
you have never made a straight through cable. Please remember you can not use a cross-over
network cable for this application
 Once you have a straight through cable plug one end into the LAN port on the back of the recorder
and the other into the high speed modem.
 Log into the EverFocus DVR menu and go to the Network Setting Menu.
 Input the Static IP address, the Subnet Mask, and the Gateway that you obtained from the internet
service provider.
98