Sequence; Monitor Switching - EverFocus Paragon960 User Manual

PARAGON960 x4 32CH

4.5 Sequence

The sequence function is used to display each channel in sequence mode. To enable this
function:
By Mouse: Click the Sequence button to enter the sequential switching mode. The DVR
will display one channel at a time in full screen. The channels will be displayed in the sequence
and for the amount of time as configured in the System > Display Setting > M/T SEQ submenu.
The default setting is channels 1~32 with a dwell time of 3 seconds each – repeated. Please refer
to 6.6.2 M/T SEQ for detailed information.
By Front Panel: Press the "Seq" button on the front panel to enter the sequential switching
mode. The DVR will display one channel at a time in full screen. The channels will be displayed in
the sequence and for the amount of time as configured in the System > Display Setting > M/T
SEQ submenu. Please refer to 6.6.2 M/T SEQ for detailed information.

4.6 Monitor Switching

You can simultaneously connect Main and Call monitors to the DVR.
By Mouse: On the OSD Root Menu, click the Monitor button to switch to the Call
monitor. On the OSD Root Menu, the Playback, PTZ, Zoom, Search, Copy, System and Exit icons
will gray out. You can only configure the Layout, Channel, Display and Sequence settings for the
Call Monitor. To switch to the Main Monitor, click the button.
By Front Panel: Press the Monitor button on the front panel to switch between Main and Call
Monitors.
Note that the Call Monitor can only be used to display camera views. The functions including the
layout, channel switching, icon display, sequencing mode of the Call Monitor can only be
configured on the Main Monitor.
51