Table of Contents
Advertisement
HD Off:
Buzzer
Check box to enable buzzer if the hard drive is turned off (disconnected) or becomes
disabled (cannot be detected by the system).
Email Notify
Check box to enable email notification when HD is off. Email operation requires that
valid email settings have been entered in the Network Setting/Email setup screen.
Network Alarm
Check box to send out a network alarm to client PC. (requires PowerCon software
and setting up Alarm Server in Network Setup menu)
Alarm Output
Selection of relay output as event reaction "NONE" (not active), "1" ~ "4" for the relay
(in 4 channel version is only 1 relay available).
Output Type
Output action when alarm is triggered.
Timeout
The amount of time the buzzer sounds when the HD is off. Duration selectable from 1
Duration
to 150 seconds.
Figure 4-16 Alarm & Event Menu – Event - HD Off
Timeout:
Alarm output lasts for the set time duration.
Permanent:
Alarm will be continuously active until user presses "Enter"
key.
Transparent:
Alarm output remains active until event ends.
Trans+Timeout:
Alarm output continues until event ends, then lasts for the
set time duration.
57
Advertisement
Table of Contents
