Table of Contents
Advertisement
4.10 System Setting
Figure
35 is a screenshot of the SYSTEM SETTING MENU. This menu is for setting up general system
4-
parameters for the DVR.
4.10.1
Date/Time
Date
Time
Date Format
Time Format
Time Zone
NTP
NTP Server
NTP Update Interval Define the update interval for NTP time synchronisation (daily, weekly or monthly)
Figure 4-35 System Menu – Date/Time
Set current Date.
Set current Time.
Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy.
Select time format 12H or 24H.
Select the time zone of current location.
Enable / disable automatic time synchronisation by NTP server.
Enter IP-Address of a valid NTP server.
To find a compatible NTP address, please follow these steps:
a) Go to a PC that is connected to the internet.
b) Click on "START" -> "RUN" -> type "command" and press "OK".
c) In the DOS Prompt, type "ping pool.ntp.org" to find out the IP address of an
NTP Server.
81
Advertisement
Table of Contents
