Table of Contents
Advertisement
3.4 Change Audio output
Use arrow keys to select camera #1 and press "Enter" key to switch audio output on and off. An audio icon
will appear on the screen. Please make sure "Record Audio" option under Camera 1~4 Basic Settings
setup menu is ON if audio recording is required. Also, the audio source and/or audio output amplifier have
to be connected properly in order to utilize the audio functions.
Note: For playback, network stream and video export the audio streams 1~4 are assigned to the video
channels 1~4.
3.5 PLAYBACK
The playback bar is the fastest way to show video from the exact time which users want to see. The
playback bar allows a user to see both a time line and the current playback indicator. The user can then
click the time line to move the indicator to the position which they want to see. The operation is as follows:
To playback:
By mouse: Right-click to bring up the menu bar and click on
By front panel: Press
The playback bar will show (see figure below):
1 2 3 4
5 6 7 8
2009/05/25 09:09:30PM
14
1. Stop key: press to stop playback
2. Slow Reverse key: press to start slow reverse playback
3. Pause key: press to pause playback
4. Slow Forward key: press to start slow forward playback
5. Fast Reverse key: press to start fast reverse playback
6. Reverse key: press to start reverse playback
7. Forward key: press to start forward playback
8. Fast Forward key: press to start fast forward playback
9. Time bar: Move the slider on the time bar to the select time to playback (The start time and end time for
time bar appears below the bar). The status of each camera is represented by different colors on the
time bar. Green means normal; orange indicates a Motion; blue indicates Video Loss, red indicates an
alarm event.
key to enter Playback Menu.
9
2009/05/25 09:09:40PM
15
to enter Playback Menu.
2009/05/25 09:10:30PM
23
10 11 13
12 10 10
16
Advertisement
Table of Contents
