ECOR960 X1
4.6 Monitor Switching
You can simultaneously connect Main and Call monitors to the DVR. On the OSD Root Menu,
click the Monitor button
to switch to the Call monitor. On the Main Monitor, right-click the
screen to display the Call Monitor control bar, and then you can configure the Layout, Channel,
Display or Sequence settings for the Call Monitor. To switch to the Main Monitor, click the
button.
Figure 4-6
Note that the Call Monitor can only be used to display camera views. The functions including the
layout, channel switching, icon display or sequencing mode of the Call Monitor can only be
configured on the Main Monitor.
4.7 Zoom
You can zoom in the camera view up to x4 and navigate the camera view using the mouse.
Figure 4-7
41