Table of Contents
Advertisement
4.3.3
Motion
Camera
Enable
Log
Main Monitor
Call Monitor
Pre-alarm Record
Buzzer
Email Notify
Network Alarm
Auto Lock
Figure 4-4 Camera Menu – Motion
Select the camera you wish to adjust. "Title" will show the title name of the selected
camera.
Check box to enable motion detection.
NOTE: Other motion options will not be available unless this feature is selected.
Check this box to record motion events in the log.
Main monitor display options when a motion event occurs.
No change
No change on the main monitor display.
Full screen
A full screen of the event camera will display on the main monitor.
Call monitor display options when a motion event occurs.
No change
No change on the call monitor display.
Full screen
A full screen of the event camera will display on the call monitor.
Check box to start copying recorded video to the hard disk from several moments
before the motion event. (Pre-alarm recording rate will follow "Normal" frame rate
setting)
Check this box to enable the buzzer when a motion event is triggered.
Check this box to send email notification when a motion event is detected. Email
operation requires that valid email settings have been entered in the Network
Setting/Email setup screen
Check box to send out a network alarm to client PC when motion occurs. (requires
PowerCon software and correct settings for the Alarm Server in the Network Setup
menu)
Check the box and the events will be recorded in the write protected segment of the
Hard Disk. (DVR will lock a period of time when alarm happen, the length of time will
43
Advertisement
Table of Contents
