Table of Contents
Advertisement
1.5 REAR PANEL
4
5
6
1 Video In:
Video input for composite signals 1 V
2 E-SATA:
Reserved for future application.
3 Audio In:
4 x Audio input, RCA socket for line audio signals 1V max., 10 KOhm impedance
4 POWER:
DC 12V power socket for external power supply 100 ~ 240 VAC.
5 ETHERNET:
RJ-45 network connection 10/100Mb/s Ethernet. There are two LEDs on the LAN jack;
Green LED means network is connected, amber LED flickers in case of traffic.
6 USB 1.0:
USB port for USB mouse.
7 RS232 socket: 9-pin D-Sub control input for RS-232 for service purpose.
8 RS485 socket: Interface for remote control via RS-485 keyboards and telemetry control of connected
PTZ devices.
9 MAIN:
Composite BNC output for main monitor (Live/Playback/Setup).
10 Call:
Composite BNC output for CALL monitor (Live only incl. multi-view).
11 Main VGA:
Main monitor - connect a VGA monitor to the VGA output connection. VGA resolution is
1024x768 @ 60 Hz.
12 Alarm In:
4/9/16 (depending on model) alarm N.O. or N.C.inputs for dry contacts.
13 Video Out:
Loop-through video outputs 1 V
1
7
8
9
10
Figure 1-2 Rear Panel
11
12
, BNC, automatic 75 Ohm terminated
pp
, BNC (1:1 connected to video inputs).
pp
5
2
3
14
13
15
.
Advertisement
Table of Contents
