EverFocus ECOR 264x1-16 Instruction Manual page 60

HD Temperature:
Log
Buzzer
Email Notify
Network Alarm
Stop Recording
Temp. Warning Limit
Alarm Output
Output Type
Figure 4-13 Alarm & Event Menu – Event - HD Temperature
Check box to record HDD temperature events in the log.
Check box to enable buzzer when hard drive's temperature is over the "Temp.
Warning Limit".
Check box to enable email notification when HDD temperature is over the
"Temp. Warning Limit". Email operation requires that valid email settings have
been entered in the Network Setting/Email setup screen.
Check box to send out a network alarm to client PC. (requires PowerCon
software and setting up Alarm Server in Network Setup menu)
Check box to stop recording when HD's temperature is over the "Temp. Warning
Limit".
Sets the trigger temperature for HD Temperature event actions. Choose
between 55C /131F or 85C /185F.
Selection of relay output as event reaction "NONE" (not active), "1" ~ "4" for the
relay (in 4 channel version is only 1 relay available).
Output action will be Transparent and cannot be changed (alarm output remains
as long as the alarm condition is active).
54