Table of Contents
Advertisement
6. Editing blocks in a time bar: when a time bar is selected (highlighted in red frame), press Enter
button, then the first block of this bar will be selected (highlighted in blue frame). Use Right/Left
arrow key to switch to desired block as starting time, and press Enter button again to confirm. At
this time, the current and all following blocks will turn into gray, which means this gray timezone
has been set to the recording mode of gray(No Rec). User can also change the timezone to a
different record mode (with different color) by following instruction in next step.
7. Changing recording mode (color) of a timezone: Use Right/Left arrow key to switch to the first block
(with number on it) of a timezone. Clicking Enter button, and this timezone will switch to another
color, which means switching to another record mode. The color switch sequence is gray->orange-
>blue.
65
Advertisement
Table of Contents
