Inter Zone Connection Number Limit - LG iPECS Feature Description & Operation

IPECS Release 5
Feature Description & Operation

2.76.2 Inter Zone Connection Number Limit

Description
If some devices exist very far from the other devices, it might cause to the bandwidth limitation.
Those devices must be controlled the number of connections according to the bandwidth limitation
for the voice quality. Inter zone connections are limited to zone maximum total inter zone connection
number and maximum inter zone connection number between zones.
Zone maximum total inter zone connection number and maximum inter zone connection number can
be set from 0 to maximum station capacity. The default values of both numbers are 0 and it means
there is no limit to inter zone connections.
Operation
Operation of this feature is automatic based on zone maximum total inter zone connection number
and maximum inter zone connection number between zones.
Conditions
1. If zone maximum total inter zone connection number is set to 0, zone total inter zone
connection will not be limited.
2. If maximum inter zone connection number between zones is set to 0, inter zone connection
between such zones will not be limited.
3. If zone maximum total inter zone connection number is set to non-zero value and current zone
total inter zone connection number is more than maximum value, the connection will be
released, error tone will be played and the station related with the connection will display
"INTER CONN LIMIT OVER" on the LCD.
4. If maximum inter zone connection number between zones is set to non-zero value and current
inter zone connection number between zones is more than maximum value, the connection will
be released, error tone will be played and the station related with the connection will display
"INTER CONN LIMIT OVER" on the LCD.
5. As the connection limit is processed at the moment of the connection establishment, if the limit
is over while incoming ring is answered, the call will be released immediately after answering
and error procedure will be activated.
6. If the recording connection for call recording is over the limit, the call will be recorded without
content.
Programming
Z D
ONE ATA
Related Features
Hardware
Zone Attributes (PGM 439-Web only)
Inter Zone Attributes (PGM 441-Web only)
2-177
5.0