Prime Line Immediately/Delayed - LG iPECS Feature Description & Operation

Telephone network
Table of Contents

Advertisement

IPECS
Release 5
Feature Description & Operation
5.18 P
L
RIME
INE
Description
When a user goes to an off-hook state, the system normally provides ICM dial tone. If desired, a
station can be assigned to access a pre-assigned system resource (Prime Line). The Prime Line
can be any of the Idle Line Settings:
Seize a CO/IP Line,
Call another station,
Activate a Flex button feature.
Prime Line access can be defined as immediate or delayed. When assigned immediate, upon an
off-hook event, the system provides access to the Prime Line. With Delayed Prime Line, the
station user receives normal Intercom dial tone for the Prime Line Delay timer and after the delay,
the Prime Line is accessed.
Operation
iPECS Phone
To access the station's Prime Line
1. Lift the handset or press [
accessed.
Conditions
1. Any of the station's Flex buttons may be assigned as the Prime Line. When the user lifts the
handset or presses the [
the button prior to going off-hook.
2. Selection of another Flex button or Feature button just prior to an off-hook event will override
the Prime Line assignment.
3. SLT can use the Flex Button Feature of Idle Line Selection with a Speed Bin Number.
4. When Delayed Prime Line is set, the user must wait, taking no action until the Prime Line is
accessed.
The user receives ICM dial tone during this period and may dial any valid
numbering plan digit(s) or select a Flex button or feature button.
5. If the Prime Line Delay Timer is greater than Dial tone timer, the Delayed Prime Line will not
activate. It will be necessary to reduce the delay timer or extend the Dial tone timer.
Programming
S
TATION
S
YSTEM
Related Features
Speakerphone
Intercom Call (ICM Call)
Station Flexible Buttons
Hardware
iPECS Phone
I
/D
MMEDIATELY
ELAYED
] button and take no action, Prime Line as assigned will be
SPEAKER
] button, the system will act as if the user had pre-selected
SPEAKER
1. Prime Line setting (PGM 113-Btn 7)
2. Idle Line Selection (PGM 121)
1. Prime Line Delay Timer (PGM 182-Btn 6)
5-17
5.0

Advertisement

Table of Contents
loading

Table of Contents