Dial Pulse To Tone Switchover; Dialing Restrictions; Class Of Service - LG iPECS Feature Description & Operation

IPECS Release 5
Feature Description & Operation
Related Features
Station Speed Dial
System Speed Dial
Hardware
iPECS Phone w/Display
2.30 D P
IAL ULSE TO
Description
On a pulse dial CO line, the user can request the system to change the signaling mode from pulse to
DTMF. This allows the user to access outside facilities that require DTMF signals such as banking
services, voice mail, etc.
Operation
To switch from pulse to DTMF while on a pulse CO line
1. Dial '*', signaling changed to DTMF.
Conditions
1. In a Speed Dial, the '*' will automatically insert a pause before dialing the remaining digits.
2. This command is only recognized for analog pulse dial CO lines.
3. Dial pulse to tone switchover is not available in the Redial features.
4. When '*' is the first digit of a dialed number, the Display Security feature is enabled and not
Pulse to tone switchover.
5. For VoIP calls, pulse dialing is not available thus; switchover is not required or supported.
Programming
CO/IP
Related Features
Speed Dial
Display Security
Hardware
2.31 D R
IALING ESTRICTIONS

2.31.1 Class of Service

Description
Dialing privileges can be assigned for each station, DISA line and Authorization Code. The dialing
privileges are the result of the interaction of the Station and CO Class of Service (COS) assignments
T S
ONE WITCHOVER
1. CO Line Type (PGM 141-Btn 4)
2. CO Line Signal Type (PGM 141-Btn 5)
2-67
5.0