LG iPECS Feature Description & Operation page 267

IPECS Release 5
Feature Description & Operation
Operation
iPECS Phone
Placing a Voice Over (OHVO) while receiving busy
1. Dial '#' or press a pre-programmed {OHVO} button.
2. After splash tone, begin announcement.
Responding to a Voice Over announcement
1. Use Camp-On response procedure or Silent Text Messaging or One-Time DND.
SLT
Placing a Voice Over (OHVO) while receiving busy
1. Dial '#'.
2. After splash tone, begin announcement.
Responding to a Voice Over announcement
1. Use Camp-On response procedure.
Conditions
1. When the called station responds via Camp-On, all conditions and options available to
Camp-On apply.
2. OHVO may be used to notify the called party of a transferred call (CO/IP Line or Intercom) by
announcing the call then releasing to complete the transfer.
3. When a call is transferred via OHVO the receiving station will receive muted ringing after the
transfer is complete.
4. The Pre-defined or Custom Text Display Message feature may be used in response to a
Voice-Over announcement and the conditions associated with these features apply.
5. Both the originating and receiving station must be programmed to allow OHVO calls.
6. When Silent Text Messaging is used to respond to an OHVO call, the existing call will not be
disconnected.
7. If the receiving station is in conference or using the Speakerphone or Group Listen, Voice
Over is not available. Camp-On will be activated and a Camp-On tone sent to the receiving
station.
Programming
S
TATION
Related Features
Call Waiting/Camp-On
Group Listening
Silent Text Message
Pre-defined & Custom Text Display Messages
Hardware
iPECS Phone to receive Voice Over
1. Voice Over (PGM 113-Btn 6)
5-30
5.0