Table of Contents
Advertisement
IPECS
Release 5
Feature Description & Operation
3.6 I
S
NTERCOM
TEP
Description
When busy tone is received on a dialed Intercom call, the user may place a call to another station
by dialing the last digit of the station number. The system replaces the last digit of the previously
dialed busy station with the dialed digit and places an Intercom call to the new station number.
Operation
iPECS Phone
To activate step call, while receiving busy on a dialed Intercom call;
1. Dial a digit other than the last digit of the busy station's intercom number.
Conditions
1. If the user dials the last digit of the busy station, Camp-On will be activated.
2. After receiving busy tone, if the user takes no action for the Busy Tone timer, 7 seconds, the
system will start the Intercom Lockout procedure.
Programming
Related Features
Intercom Lock-Out
Intercom Call (ICM Call)
Hardware
3.7 I
T
NTERCOM
ENANCY
Description
Stations in the iPECS are assigned to an Intercom Tenancy Group, group 00 ~ 15. Stations in a
group are allowed or denied the ability to place intercom calls to stations in other groups on a
group-by-group basis.
Each Intercom Tenancy Group is assigned an Attendant station. All dial '0' calls from a station in
the group are routed to the assigned Attendant. In addition, the assigned Attendant can control the
Day/Night Ring mode for stations in the group switching from Day to Night mode. Each group is
assigned a separate Auto Ring Mode Table to change the Ring and COS mode automatically
during the day and night service mode. In addition, DID calls to the system can be routed to a
specified Intercom Tenancy group. By defining the group as the destination in the Flexible DID
Conversion table calls will follow the Tenancy Group Auto Ring Mode table.
Operation
System
Operation of Intercom Tenancy Groups is automatic when programmed.
C
ALL
G
ROUP
3-5
5.0
Advertisement
Table of Contents
