Co/Ip; Auto Fault Detection And Recovery; Co Line Flash - LG iPECS Feature Description & Operation

IPECS Release 5
Feature Description & Operation

4. CO/IP

4.1 A F
UTO AULT
Description
If a CO line fault is reported from a PRI/VoIP/SIP gateway, the iPECS places the CO Line in an
Out-Of-Service state and places it in the Unused CO/IP Group. Upon receiving the CO Line
recovery report, the CO Line is automatically restored. The fault is also reported to the iPECS
NMS when configured.
Operation
System
Operation of Fault Detection and Recovery is automatic.
Conditions
1. The "Unused" CO Group contains CO line numbers that are not used or are temporally
blocked.
Programming
CO/IP
Related Features
CO/IP Line Groups
Hardware
4.2 CO L F
INE LASH
Description
Analog CO lines recognize a brief open or ground connection, "Flash", as a request for new dial
tone. When used behind a PBX, a Flash is often used to activate a PBX feature or call transfer.
Operation
iPECS Phone
While connected to an analog CO line
1. Press the [
FLASH
SLT
While connected to an analog CO line
1. Momentarily depress the Hook-switch.
2. Dial '551', the Flash feature code.
D R
ETECTION AND
1. CO Line Group (PGM 141-Btn 1)
] button, the system generates a flash on the CO line.
ECOVERY
4-1
5.0