LG iPECS Feature Description & Operation page 54

IPECS Release 5
Feature Description & Operation
2. Dial Call Forward feature access dial code '554',
3. Dial '#' to cancel Call Forward.
Conditions
1. A station receiving a forwarded call can transfer the call to the forwarding station.
2. A station, denied the use of Call Forward, will receive error tone in response to attempts to
activate Call Forward.
3. A forwarded intercom call will signal the receiving station in the Tone Signaling mode,
regardless of the Intercom Signaling Mode at the station.
4. Calls cannot be forwarded to a station in DND and, if attempted, error tone is returned.
5. Attempting activation of Call Forward will automatically deactivate any activate Display Text
Message. Active Call Back or Queue requests are not canceled.
6. When Call Forward is active, a station can make outgoing calls (internal or external) but cannot
activate a Call back or Queue request.
7. Private lines can be forwarded if the forwarding and receiving station have a direct appearance
{ } button for the Private line or if calls are forward to a VSF, VMIM or Voice Mail group.
CO
8. For CO/IP calls, manually activated Call Forward will override any Preset Call Forward
assigned for the station or CO/IP line.
9. Users may forward calls to the VMIM/VSF without recording a greeting, in which case, calls are
still forwarded to the VMIM/VSF but callers receive the "No announcement recorded" message
before they can leave a voice mail.
10. Call Forward status is maintained in the system's non-volatile memory for protection from
power outage.
11. A station in a Station Hunt Group (ACD, Circular or Terminal) can be assigned to receive
incoming hunt calls, overriding any Call Forward. That is, the system either recognizes the
Forward condition and bypasses hunt calls around the station or routes hunt calls to the station
based on the system database (Member Forward).
12. Off-Net Call Forward of incoming CO/IP calls is essentially an automated DISA call, which will
establish an Unsupervised Conference. Such calls are subject to the conditions of a DISA call
and Unsupervised Conference and may require entry of an Authorization Code.
13. Off-Net forward calls are not answered until the system completes dialing of the external call.
The call, internal or external, is then connected to the Off-Premise call.
14. If the Speed Dial number used in Off-Net Call Forward contains a Flash, only digits prior to the
Flash are dialed.
15. An unlimited number of stations may be set-up in a Call Forward chain, forwarding calls from
one station to the next. However, a station cannot forward calls to a station already a part of
the chain.
16. Calls to a Call Forward chain will progress as appropriate through the chain to the last station.
If the last station enters DND, CO/IP calls revert to the previous station while intercom calls
receive DND tone.
17. No Answer forward employs the Station No Answer Forward Timer unless it is set to zero in
which case the System No Answer Timer is used.
Programming
S
TATION
1. Call Forward (PGM 111-Btn 2)
2-39
5.0