Conference; Conference Room - LG iPECS Feature Description & Operation

IPECS Release 5
Feature Description & Operation
5. Queue recall will signal a station for 15 seconds, after which, the station is removed from the
queue; the queue is cancelled.
Programming
S
TATION
Related Features
CO/IP Access
Hardware
2.23 C
ONFERENCE

2.23.1 Conference Room

Description
In addition to ad-hoc conferencing, users may establish a Conference Room. Other internal and
external parties are invited to the conference and can join the conference without further action by
the user who established the Conference Room. A user can transfer an active call to a Conference
Room. A Conference Room can be password protected so that only parties that enter the password
are allowed to join the Room.
Up to 9 Conference Rooms can be set-up and each can support a maximum of 32 parties with the
g.711 or g.729 codec or 24 parties with the g.723 codec. Conference Rooms employ channels from
an MCIM (Multi-party Conference Interface Module). Each MCIM supports up to 32 parties and
multiple MCIM units may be installed as shown in the chart below.
iPECS-Micro
iPECS-50 & 100
iPECS-300
iPECS-600
iPECS-1200
Operation
Attendant Phone
To view Room participant list
1. Press the button.
PGM
2. Dial '054'.
3. Dial Room number (1~9).
To delete a Conference Room
1. Press the button.
PGM
2. Dial '055'.
3. Dial Room number (1~9).
1. CO/IP Queuing (PGM 112-Btn 5)
1 MCIM unit maximum
2 MCIM units maximum
4 MCIM units maximum
8 MCIM units maximum
30 MCIM units maximum
2-55
5.0