LG iPECS Feature Description & Operation page 144

IPECS Release 5
Feature Description & Operation
To delete stored records
1. Press the [ ] button.
PGM
2. Dial '0112', the SMDR delete code.
3. Enter the desired station range.
4. Press the [
SAVE
To abort SMDR printing
1. Press the [ ] button.
PGM
2. Dial '0114', the SMDR abort code.
3. Press the [
SAVE
Conditions
1. For SMDR, if the first dialed digit(s) match the programmed LD code or the number of dialed
digits exceeds the LD digit count, the call is considered an LD call. When behind a PBX, LD
determination is made only if a PBX Trunk Access code is dialed as the first digit(s).
2. Except for DISA calls, the duration of ring for an incoming call is provided in the Dialed number
field.
3. A header, including the assigned "Customer Site Id" is output after two blank lines and is
repeated every 66
4. The SMDR output is a simple ASCII stream of up to 80 characters per line.
5. When enabled, SMDR call record timing begins after the "SMDR Start Timer" expires and ends
at call completion.
6. For security, if an Authorization code is entered as the Account code, the call record will show
"STA-P" and the station number, or "SYS-P" and the Authorization code bin number in place of
the Account code.
7. For incoming calls, the "NUM I" and "NUM II" fields will display the assigned data item – Ring
Service time, CLI, or CPN. For outgoing calls, the NUM I field will always display the dialed
number, user or system.
Programming
S
YSTEM
Related Features
Call Cost Display
Lost Call Recording
Traffic Analysis
Authorization Codes (Password)
Hardware
RS-323 device to capture SMDR
] button.
] button.
th
line.
1. SMDR Attributes (PGM 177)
2. Field I (PGM 177-Btn 20)
3. Field II (PGM 177-Btn 22)
4. Print Serial No (PGM 177-Btn 23)
5. SMDR DISC Cause (PGM 177-Btn 24-5)
6. SMDR ICM SAVE (PGM177-Btn 24-3)
7. SMDR ICM PRINT (PGM177-Btn 24-4)
2-129
5.0