LG iPECS Feature Description & Operation page 178

IPECS Release 5
Feature Description & Operation
2. Press [ /
MSG CALLBK
ST CL VS VM FS MS
001 001 005 006 001 004
3. Dial digit '3' to select VMIM/VSF Messages
4. Press the [ /
MSG
5. Dial the Mail Box and corresponding password to receive the "Number of Messages" prompt.
6. Dial desired option code.
7. At completion of session, hang-up to return to idle.
Or,
1. Lift the handset or press the [
2. Press {
VMAILBOX
3. Dial the Mailbox password to receive the "Number of Messages" prompt.
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
To attach a memo to the current voice message;
1. During or after the New or Old Message option prompt, dial '7'.
2. At the beep, record the memo.
3. Dial '*' to stop recording and store the memo.
4. During or after the New/Old option prompt, dial 4 to forward the message and memo.
SLT
To retrieve Voice Mail locally
1. Lift the handset.
2. Dial the Voice Mail Group to receive the "Mailbox & Password" prompts sequentially.
3. Dial the Mailbox and corresponding password to receive the "Number of Messages" prompt.
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
To attach a memo to the current voice message;
1. During or after the New or Old Message option prompt, dial '7'.
2. At the beep, record the memo.
3. Dial * to stop and store the memo.
4. During or after the New Old option prompt, dial '4' to forward the message and memo.
Conditions
1. If no new/old messages are available, pressing '1' or '2', is an invalid operation and the user
receives the "Invalid Entry" prompt or "No Message" prompt.
2. If the dialed number is not recognized, the "Invalid Entry" prompt is played. After the second
invalid entry, the user is disconnected.
3. The user may dial digits at any time during a voice mail playback, system prompt or silence.
The user must dial a digit in response to a system prompt within the CCR Analysis timer or the
system will disconnect and return error tone.
4. Messages can be retrieved in either a FIFO (First in First out) or LIFO (Last in First out) order to
meet the desire of each user.
] button. The message contents summary is shown as below.
] to receive the "Mail Box & Password" prompts sequentially.
CALLBK
SPEAKER
} button.
] button
2-163
5.0