Set The Time Zone - LG PCS200R Pro:Centric Installation And Setup Gude

(Continued from previous page)
Interface eth1
Host name:
Using DHCP:
Host IP address:
Network mask:
Gateway IP address:
Speed:
DNS servers
Primary DNS:
Secondary DNS:
Do you want to save the new configuration? [y/n]:
12. Type y or n and press Enter, as appropriate.
If you opt NOT to save the new configuration, the system will return immediately to the
Main Menu Command > prompt. Otherwise, the system will confirm the configuration
updates and prompt you to reset the system:
New configuration has been saved. Please restart the system.
13. If you are ready to reset the system immediately, at the Command > prompt, type reset
and press Enter (see "Reset the System" on page 32 for further information).
Note: If you intend to modify additional configuration settings during the current session,
you may wait until all changes are complete before you reset the system.

Set the Time Zone

Note: See "Set the Date and Time" on page 27 for information on setting the date and time
for the PCS200R.
1. Log in to the PCS200R as described on page 21.
2. At the Command > prompt, type tz and press Enter.
The system displays the current time zone information for the PCS200R and prompts you
to specify whether or not you wish to change the time zone.
Current time zone is: America/New York
Change the time zone? [y/n]:
3. Either:
• Type n and press Enter to return to the Main Menu Command > prompt without changing
the current time zone.
• Type y and press Enter to change the time zone. Then, continue with step 4.
206-4227
PCS200R Configuration Options (Cont.)
pcs200r
NO
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
1000Mbps
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
(Continued on next page)
25