LG iPECS Feature Description & Operation page 269

IPECS Release 5
Feature Description & Operation
7. If LSS label is not programmed, MFIM gives the default name of LSS feature.
8. If ICM number is programmed to LSS and the label is not programmed, destination station
name is displayed. If the station doesn't have its name, STAXXX is displayed by default.
9. If Speed number is programmed to LSS and the label is not programmed, the Speed name
is displayed. If the Speed bin doesn't have its name, SPDXXX is displayed by default.
10. When program DSS button feature of Label, 1
from button 97, 3
11. When using keyset admin serial DSS buttons don't work.
12. To program DSS button using keyset admin, press volume up/down button to scroll flexible
button number index.
13. When DSS configuration is changed, the initial value of 48Btn DSS is as same as initial
value of DSS map1 ~ map4, 12BTN DSS and 12BTN LSS doesn't have initial values.
14. If DSS configuration is changed and the phone restarts, programmed DSS data is initialized
from the changed DSS.
15. To Control LSS contrast, press volume up/ down button in idle state. DSS contrast is
changed with keyset LCD.
16. Once after serial DSS is connected to LIP-8000, the configuration DB is saved until different
type of serial DSS is connected to the station.
17. Each station can have serial DSS usage authority option. If disabled, serial DSS
configuration of the station is initialized and DSS is not installed to that station.
Programming
S
TATION
Related Features
Hardware
rd
DSS starts from button 145, 4
1. Serial DSS Usage (PGM 111 –Btn21)
2. Flex Button Assign (PGM 115)
3. Serial LSS Label Edit (PGM 129)
5-32
st
DSS starts from button 49, 2
th
DSS starts from button 193.
5.0
nd
DSS starts