Auto Call Release - LG iPECS Feature Description & Operation

IPECS Release 5
Feature Description & Operation
S
YSTEM
T
ABLES
Related Features
Account Code
Auto Service Mode Control
Direct Inward System Access (DISA)
CO/IP Line Groups
CO/IP Access
Temporary Station COS/Lock
Walking COS
Call Forward
Station User Programming & Codes
Hardware
2.4 A C R
UTO ALL
Description
CO/IP or intercom calls (except Hands-free Answerback), will be released automatically if the user
does not complete dialing or, for intercom calls, the called party does not answer after a pre-
determined time.
Operation
System
Auto Call Release of Intercom calls:
If a station places an intercom call and the called station does not answer in the Intercom Call
Release Time, the call is terminated and the calling user receives error tone.
Auto Call Release of CO/IP calls:
If a station seizes an idle CO/IP Line and does not dial within the CO/IP Call Automatic Release Time,
the call is terminated and the user will receive error tone.
Conditions
1. If the Automatic Call Release Timer is set to '0', Auto Call Release is disabled.
2. When the handset is used to place a call, the user will receive error tone for 30 seconds
followed by 30 seconds of Howler tone and the station is placed in a fault mode. If on-hook
dialing is used, the station receives error tone for one (1) second and returns to idle
automatically.
1. DISA Retry Counter (PGM 160-Btn 5)
2. FAC Retry Count (PGM 160-Btn 16)
3. Old Auth Code Use (PGM 161-Btn 16)
4. COS 7 When Auth fails (PGM 161-Btn 17)
1. LCR Check Password (PGM 221-Btn 6)
2. Station Authorization Code Table (PGM 227)
ELEASE
2-6
5.0