Replacing The Front And Rear Direction Indicator Bulbs - APRILIA RSV 1000 R Factory Use And Maintenance Book

CAUTION
Never pull on the wiring to disconnect a
bulb connector.
PARKING LIGHT BULB
◆
Remove the front fairing, see page 84
(REMOVING THE FRONT FAIRING).
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
108
CAUTION
Never pull on the wiring to extract a
bulb holder.
◆
Grasp the parking light bulb holder (6)
and pull to extract.
◆
Remove the bulb and fit a new bulb of
equal rating.
NOTE
Ensure that the bulb locates
correctly into the bulb holder.
1
6
REPLACING THE FRONT AND
REAR DIRECTION INDICATOR
BULBS
Read page 106 (BULBS) carefully.
◆
Place the vehicle on the stand, see page
60 (PLACING THE VEHICLE ON THE
STAND).
◆
Unscrew and remove the screw (1).
CAUTION
The protective shield is retained by a
locating peg. Remove carefully or the
locating peg might break off.
◆
Remove the lens (2).
2