APRILIA RSV 1000 R Factory Use And Maintenance Book page 25

DIAGNOSTICS
1) Each time the ignition key is set to " ",
efi
the wording " " is displayed for about
three seconds.
CAUTION
efi
When the " " wording turns on and the
warning light ( ) comes on during
normal engine operation, it means that
the Engine Control Unit has detected an
anomaly.
In most cases the engine will keep
running, although with less than ideal
performance. However, contact an
Official Dealer without delay.
aprilia
ENGINE OIL PRESSURE
Each time the ignition key is set to " ", the
engine oil pressure light comes on for
about three seconds.
CAUTION
If the engine oil pressure light stays on
and the warning light (
well, after engine firing or during normal
engine operation, it means that the
engine oil pressure is low.
Stop th e en gin e imm ed i ately an d
contact an Official Dealer.
aprilia
SETTING THE RED LINE THRESHOLD
(WITH ENGINE OFF ONLY)
W h e n t h e m a x i m u m r p m s e t i s
exceeded, the red line warning light
(r ed) (1) on th e da shb oar d starts
blinking.
NOTE
) comes on as
threshold, which operates the red line light,
can only be set with the engine off and the
odometer displayed. Setting range is 2,000
- 12,000 rpm.
Factory setting is 6,000 rpm.
To view red line threshold setting, hold
down the "Trip/V" button for at least 3
seconds. The rev counter pointer (2) will
point the corresponding rpm for three
seconds.
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
1
2
The red line
25