APRILIA RSV 1000 R Factory Use And Maintenance Book page 38

Hide thumbs Also See for RSV 1000 R Factory:
Table of Contents

Advertisement

WARNING
Avoid long exposure of brake fluid to
air.
Brake fluid is hygroscopic and will
absorb moisture from the air.
Keep the brake fluid reservoir open
JUST LONG ENOUGH to top up level.
Raise and remove the cover (3) together
with the screws (1) and the gasket (4).
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
38
1
4
3
2
CAUTION
Do not rock the motorcycle from side to
side when topping up or brake fluid will
spill out.
Do not add any additives or other
products.
If you use a funnel or other tool, ensure
they are perfectly clean.
Top up the reservoir (2) with brake fluid,
see page 117 (LUBRICANT CHART)
until exceeding "MIN" level mark.
CAUTION
While topping up, never pour too much
fluid.
Fill up to max. level only with new brake
pads.
If topped up to max. level with worn
pads, brake fluid will spill out when you
change the pads at a later time.
Check braking efficiency.
When the brake lever has exceeding
travel or if you notice a loss of braking,
contact an
Official dealer. The
aprilia
braking system may need bleeding.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents