Overview Of Options Configurable From A Phone - Cisco 7971G-GE - IP Phone VoIP Administration Manual

Overview of Options Configurable from a Phone

The Cisco Unified IP Phone provides several methods you can use to reset or restore option settings, if
Note
necessary. For more information, see the
on page
Related Topics
•
•
•
•
•
•
Overview of Options Configurable from a Phone
The settings that you can change on a phone fall into several categories, as shown in
detailed explanation of each setting and instructions for changing them, see the
Menu" section on page
There are several options on various configuration menus that are for display only or that you can
Note
configure from Cisco Unified Communications Manager. These options also are also described in this
chapter.
Table 4-1 Settings Configurable from the Phone
Category Description
General Network Settings
VLAN settings Admin. VLAN ID allows you to change the administrative
VLAN used by the phone. PC VLAN allows the phone to
interoperate with third-party switches that do not support a
voice VLAN.
Port settings Allow you to set the speed and duplex of the network and
access ports.
IPv4 Network Settings
DHCP settings Dynamic Host Configuration Protocol (DHCP)
automatically assigns IP address to devices when you
connect them to the network. Cisco Unified IP Phones
enable DHCP by default.
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
4-4
9-13.
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Overview of Options Configurable from a Phone, page 4-4
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-10
Security Configuration Menu, page 4-29
4-5.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
"Resetting or Restoring the Cisco Unified IP Phone" section
Network Configuration Menu Option
Admin. VLAN ID
PC VLAN
SW Port Configuration
PC Port Configuration
DHCP
DHCP Address Released
Table 4-1. For a
"Network Configuration
OL-15299-01