Overview Of Options Configurable From A Phone - Cisco 7975G Administration Manual

Overview of Options Configurable from a Phone

The Cisco Unified IP Phone provides several methods you can use to reset or restore option settings, if
Note
necessary. For more information, see the
on page
Related Topics
•
•
•
•
•
•
Overview of Options Configurable from a Phone
The settings that you can change on a phone fall into several categories, as shown in
detailed explanation of each setting and instructions for changing them, see the
Menu" section on page
There are several options on various configuration menus that are for display only or that you can
Note
configure from Cisco Unified Communications Manager. These options also are also described in this
chapter.
Table 4-1 Settings Configurable from the Phone
Category Description
DHCP settings Dynamic Host Configuration Protocol (DHCP)
automatically assigns IP address to devices
when you connect them to the network. Cisco
Unified IP Phones enable DHCP by default.
IP settings If you do not use DHCP in your network, you
can make IP settings manually.
TFTP settings If you do not use DHCP to direct the phone to a
TFTP server, you must manually assign a TFTP
server. You can also assign an alternative TFTP
server to use instead of the one assigned by
DHCP.
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
4-4
9-15.
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Overview of Options Configurable from a Phone, page 4-4
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-12
Security Configuration Menu, page 4-32
4-5.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
"Resetting or Restoring the Cisco Unified IP Phone" section
Network Configuration Menu
Option
DHCP Enabled
DHCP Address Released
Domain Name
IP Address
Subnet Mask
Default Router 1-5
DNS Server 1-5
TFTP Server 1
Alternate TFTP
TFTP Server 2
Table 4-1. For a
"Network Configuration
OL-12642-01