Retrofitting / Replacing / Adjusting The Tip-Assist; Retrofitting / Replacing The Anti-Tipper - Otto Bock BRAVO Racer Service Manual

Now push the hexagonal multi-function adapter past the loosened adjustment tube onto the
exposed hexagon nut on the rear wheel axle (Figure 5). Secure the multi-function adapter using
the clamping screw (Figure 6).
Reinstall the adjustment tube, rear wheel attachment, and wheels. Repeat the steps described
above in reverse order.

4.1.2 Retrofitting / replacing / adjusting the tip-assist

First, proceed as described in Section 4... Then press in the spring-mounted push button on
the tip-assist and push the tip-assist onto the multi-function adapter to the desired mounting
position (Figure 7).

4.1.3 Retrofitting / replacing the anti-tipper

First, proceed as described in Section 4.. up to the point where the adjustment tube is loosened.
Now push the pre-assembled anti-tipper onto the exposed rear wheel axle until the anti-tipper
adapter (hexagonal shape) is in place on the hexagon nut of the axle. Secure the anti-tipper us-
ing the clamping screw (Figure 8) and test the swing-away and locking functions.
5
7
6
8