Replacing / Retrofitting / Setting Transport Wheels, Crutch Holder, Or Tip-Assist - Otto Bock Motus Service Manual

4.1.5 Replacing / Retrofitting / Setting Transport Wheels, Crutch Holder, or Tip-assist

Mount the receiver tube for transport wheels, crutch holder, or tip-assist on the inside of the
frame tube as shown (Fig. 20).
The receiver tube for the anti-tipper has a slightly different design and cannot be used
INfORMATION
for these options.
Insert the sleeve provided from below into the receiver tube (Fig. 21). Slide the desired accessory
item into the receiver tube until it audibly snaps into place (Fig. 22).
If using the crutch holder, an additional hook and loop strap is to be attached to the
INfORMATION
upper back tube. To do this, loosen and remove the uppermost screw at the back tube. Position
the hook and loop strap between the screw and back tube (Fig. 22A) and retighten the screw.
1
20 21
1