Installing The Motherboard; Figure 3-13 Releasing The Motherboard Latch - Sun Microsystems Ultra 25 Service Manual

Motherboard handle
Releasing the Motherboard Latch
FIGURE 3-13
8. Move the cables out of the way.
9. Using the motherboard handles, tilt the motherboard to one side and lift it until it
is free of the chassis (
10. Set the motherboard down onto the antistatic mat.
3.6.2

Installing the Motherboard

1. Remove the new motherboard from its antistatic package and place it on an
antistatic mat.
2. Move all cables out of the way.
3. Align the motherboard rear panel connectors with the matching holes in the rear
panel (
FIGURE 3-13
).
FIGURE 3-13
Chapter 3 Replacing the Motherboard and Associated Components
Motherboard handle
Motherboard latch
).
3-23